top of page

प्रेसिजन डायमंड वायर लूप और डायमंड वायर सॉ सबसे लचीले कटिंग टूल्स में से एक है, जो स्टील की सतह पर डायमंड क्रिस्टल को सेट करता है और वन-वे मूवमेंट करता है, जो डायमंड क्रिस्टल की सतह पर सेट हो सकता है। काटते समय, हीरे का तार एक दिशा से 30-60 मीटर / सेकंड की गति से आगे बढ़ेगा। यह यूजर्स को बेहतरीन फायदे देगा। HANS से ​​लचीली CBN और डायमंड वायर आपको उनकी उच्च तन्यता ताकत, उनकी मजबूत अनाज की बॉन्डिंग के साथ-साथ डायमंड लूप वायर और डायमंड ग्रेन की उच्च गुणवत्ता से भी रूबरू कराएगी।
विशिष्टता
1) बाहरी व्यास 0.5-1.0 मिमी रिम है
2) बाहरी व्यास 1.0-1.5 मिमी रिम या सेगमेंट रिम जारी रख सकते हैं
3) बाहरी व्यास 1.5-3.0 मिमी सेगमेंट रिम काटने पर उच्च दक्षता है, जबकि 30 से 60 मीटर / एस से गति, 0.3-3.0 मिमी से व्यास, 800-50000 मिमी से लंबाई और मौजूदा बाजार में लोकप्रिय मशीन के लिए गणित में कटौती। गीला या शुष्क वातावरण दोनों में फिट बैठता है, काटने की दिशा ग्राहक की आवश्यकता के अनुसार बदल सकती है। और घुमावदार सतह को काटने के लिए भी आवेदन कर सकता है। हीरे के तार का संचालन और प्रतिस्थापन वास्तव में सम्मेलन है, व्यापक रूप से रबर मशीन और सामग्री की कठोर सतह को काटने पर उपयोग किया जाता है, जैसे कि, टायर सेक्शन काटने की मशीन, टायर सेक्शन काटने की मशीन, कृत्रिम क्रिस्टल (नीलम, सिलिकॉन), विशेष सिरेमिक, कीमती धातु, ग्रेफाइट और प्लास्टिक, भंगुर सामग्री। अनुसंधान क्षेत्र पर भी उपयोग किया जाता है: भूविज्ञान, पुरातत्व, वास्तुकला और जीव विज्ञान आदि। टायर सेक्शन कटिंग मशीन के लिए देखे गए डायमंड लूप वायर की भी आपूर्ति करते हैं। अन्य हीरा काटने के उपकरण की तुलना में, लूप हीरा तार एक लचीला उपकरण है:
1, न केवल सीधे लाइन काटने के लिए इस्तेमाल किया जा सकता है, बल्कि घुमावदार कटिंग भी;
2 the वस्तु की सतह के आकार के अधीन नहीं;
3 can कार्यस्थल को बस आवश्यकता होती है, लेकिन बड़े क्षेत्र में कटौती की जा सकती है;
4 can हीरे के तार का उपयोग देखा संसाधन उपयोग में सुधार और पर्यावरण प्रदूषण को कम कर सकता है। उपर्युक्त फायदों के कारण, हीरे के तारों के बाजार शेयर बड़े और बड़े होते जा रहे हैं, और आवेदन का दायरा व्यापक और व्यापक होता जा रहा है। हमारे ग्राहकों में से कई लोग गवाही दे सकते हैं, हंस सेवा और समर्थन हमें हमारे समाधान में बढ़त देता है। आपकी आवश्यकताओं, हम आपकी तत्काल और दीर्घकालिक आवश्यकताओं के लिए रहेंगे। व्यावसायिक सेवाएँ और परामर्श आपके व्यवसाय के लिए आवश्यक हैं।

हीरा सुरक्षा प्रौद्योगिकी के विकास के लिए आवश्यक है

Specification 

Our diamond wire loop is designed for high efficiency cutting with a speed range of 30 to 60 m/s. It has a diameter range of 0.65-3.0 mm and a length range of 800-100000 mm. It is compatible with popular machines in the current market and can be used in wet or dry environments. The cutting direction can be changed according to the customer's requirements, and it is also suitable for cutting curved surfaces.
Our diamond wire is easy to operate and replace, making it a convenient tool for cutting hard surfaces such as rubber machines, tire section cutting machines, artificial crystals (sapphire, silicon), special ceramics, precious metals, graphite, plastics, and brittle materials. It is also widely used in research fields such as geology, archaeology, architecture, and biology.
In addition to the diamond wire, we also supply the diamond loop wire saw for tire section cutting machines. Compared to other diamond cutting tools, the loop diamond wire is a flexible tool that can be used for straight line cutting as well as curved surface cutting. It is not limited by the shape of the object's surface and can be used for large area cutting with simple workplace requirements. The use of diamond wire saws can improve resource utilization and reduce environmental pollution.
As the market demand for diamond wires continues to grow, our company is committed to providing excellent service and support to our clients. We offer professional services and consulting tailored to your business needs, ensuring immediate and long-term support for all your requirements. Choose Flexible Service and Support for the edge in your cutting solutions.

1）Not only can be used for straight line cutting, but also curved surface cutting; 

2）Not subject to the shape of the surface of the object; 

3）The workplace requires simply, but large area cutting can be carried on; 

4）The use of diamond wire saw can improve resource utilization and reduce environmental pollution. Due to the above advantages, the market shares of diamond wires are getting bigger and bigger, and the scope of application is getting wider and wider.As many of our clients can testify, Flexbile Service and Support gives us the edge in our solutions.Whatever your requirements, We will be there for your immediate and long term needs.Professional Services & Consulting Tailored to Your Business.

Diamond Coated Wire Loop
Precision ​Diamond Wire Loop Diamond Coated Cutting Wire Diamond Wire Saw
  • What is the diameter of diamond wire?
    Specifications Type Outer-Ø (mm) Grain size (µm) DW.080-L 0,08 - 0,085 10 - 12 DW.150-L 0,13 - 0,15 15 - 20 DW.200-L 0,18 - 0,20 20 - 30 DW.250-L 0,23 - 0,26 30 - 40
  • What is diamond cut wire?
    Diamond wire cutting (DWC) is the process of using wire of various diameters and lengths, impregnated with diamond dust of various sizes to cut through materials. Because of the hardness of diamonds, this cutting technique can cut through almost any material that is softer than the diamond abrasive.
  • Can diamond wire cut wood?
    Advancements in new high speed diamond wire cutting machines have made this process suitable for wood machining. A diamond wire saw cuts a smooth surface. The stainless steel wire is crimped with synthetic diamonds which produces a pure cut (similar to a waterjet).
  • Can a wire saw cut through metal?
    The saw can be used for precision cutting of semiconductors, ferrites, metals, glasses, minerals as well as many other hard or brittle solids.
  • How do you calculate wire cut time?
    As shown in the formula below, cutting time can be found by ℓm (workpiece length) ÷ ℓ(cutting length per minute). Example: When cutting length per min is 20mm and workpiece length is 100mm; 100÷20=5. Cutting time is 5 minutes.
  • What is the HS code for Diamond cutting wire?
    Diamond Wire Saw Import Data under HS Code 82089090 with Price.
  • What is the speed of diamond wire saw cutting?
    between 24 and 30 m/s The cutting action of a diamond wire consists in pulling a properly pre-tensioned wire saw across the stone block at a linear speed of between 24 and 30 m/s, and simultaneously lowering it at a down-feed rate tailored to meet the optimum combination of productivity and wire life.
  • What is diamond wire made of?
    The rope used on an industrial diamond wire saw machine is a made from a loop of high tensile steel connected by a mechanical joiner. On the outside of the rope are carrier rings, on which diamonds are either sintered or retained by an electroplated layer.
  • What are the disadvantages of wire cutter?
    The wire itself also suffers damage, so the EDM machine must constantly feed new wire. Depending on the metal being cut, another disadvantage of wire EDM cutting is that an oxide layer can form on the cut surface. This may require secondary cleaning, which adds to cost.
  • What is the HSN code for diamond wire saw rope?
    Diamond Wire Rope Import Data under HS Code 82071900 with Price.
  • How do you use a diamond wire saw?
    How does a diamond wire saw work? Wire saws are most comparable in principle to that of a reciprocating saw or bandsaw. The Diamond wire is placed around a material that needs to be cut, or threaded through a bore hole, and is then run at speed to utilise abrasion to effectively cut through slab or reinforced steel.
  • What method of cutting does a wire saw use?
    Wire saw systems rely on a series of guided pulleys to draw a continuous loop of diamond impregnated wire through otherwise impenetrable material. This technology creates any desired shape or directional cut with ease.
  • How Diamond Wire Saws Work
    The Diamond wire is placed around a material that needs to be cut, or threaded through a bore hole, and is then run at speed to utilise abrasion to effectively cut through slab or reinforced steel. This method can produce a lot of heat and needs cooling so it can be used.
  • Can diamond wire cut steel?
    Steelcut diamond wire is ideal for cutting metal and heavy-reinforced concrete in a range of industrial and civil applications. The wire allows to make cuts in reinforced concrete sections, ensuring a clean and vibration-free operation so protecting the surrounding structures.
  • What is the process of diamond wire saw?
    Diamond wire cutting (DWC) is the process of using wire of various diameters and lengths, impregnated with diamond dust of various sizes to cut through materials. Because of the hardness of diamonds, this cutting technique can cut through almost any material that is softer than the diamond abrasive.
  • What speed does diamond wire cut?
    The diamond wire cutting tool travels at a relatively slow rate of speed, which is continuously adjustable up to 2.5 meters per second. This low rate of speed helps ensures a gentle cutting action as well as makes the "blade" safe to the touch while the cut is in process.
  • What is the composition of diamond wire?
    Diamond wires are cutting tools for rocks (marble, granite etc.), concrete and substitutes of saws in general (1-5). They are composed of an AISI 316 stainless steel cable over which are assembled diamond sintered pearls with 10 to 12 mm in diameter spaced 25 mm between each one.
  • How thick is wire cut machine wire?
    A wire of 0.1 to 0.3mm in diameter is typically used. The metal to be machined is melted and cut by the discharge, but the wire is partially consumed at the same time, as a discharge trace is formed. (The trace is created when the wire surface melts and splatters.)
  • What is a wire saw used for?
    Wire saws can be used to cut through concrete walls, floors, slabs, and other thick materials. They are often used in demolition projects or to make openings for doors, windows, or vents. Wire saws can also be used to cut pipes, rebar, and other metal objects embedded in concrete.
  • What is the cutting width of a diamond wire saw?
    The diamond wire saw type is a table saw in horizontal design so that the smallest cut-offs can be observed with the naked eye or also by means of an attached microscope. The maximum workpiece cutting area is 90 x 90 mm and the recommended diamond wire thickness is 0.08 to 0.35 mm.
  • Can diamond wire cut steel?
    Steelcut diamond wire is ideal for cutting metal and heavy-reinforced concrete in a range of industrial and civil applications. The wire allows to make cuts in reinforced concrete sections, ensuring a clean and vibration-free operation so protecting the surrounding structures.
  • Does wire diameter matter?
    The larger the cross-section of a wire, the less its resistance. Also, the larger the cross-section, the greater the amount of current (amperage) the wire can safely carry before overheating. A wire with a smaller gauge (larger diameter) can carry more power than one with a larger gauge.
  • How do I add a new question & answer?
    To add a new FAQ follow these steps: 1. Manage FAQs from your site dashboard or in the Editor 2. Add a new question & answer 3. Assign your FAQ to a category 4. Save and publish. You can always come back and edit your FAQs.
  • How do I edit or remove the 'Frequently Asked Questions' title?
    You can edit the title from the FAQ 'Settings' tab in the Editor. To remove the title from your mobile app go to the 'Site & App' tab in your Owner's app and customize.
  • Can I insert an image, video, or GIF in my FAQ?
    Yes. To add media follow these steps: 1. Manage FAQs from your site dashboard or in the Editor 2. Create a new FAQ or edit an existing one 3. From the answer text box click on the video, image or GIF icon 4. Add media from your library and save.
bottom of page